Stationary Docks
Easy Assembly - Easy Installation

Our steel stationary boat dock is designed for easy assembly and installation. Side sections are made from 10' long, 4" high galvanized steel (14 gauge) with 1 1/2" flanges on both the top and bottom to help provide both strength and durability. Each side section has a 1 1/2" x 1 1/2" CCA pressure treated, yellow pine nailer strip attached to the top flange. This allows the 5' x 38 1/4" deck panel to be nailed in place. Deck panels consist of factory assembled, 1" x 4" CCA pressure treated, yellow pine. The dock brackets are welded to 10 gauge steel cross members with two (2) 6" x 2" ID pipe holders welded to each end. Once welded, the dock brackets are hot-dipped galvanized. All 1.90" diameter (.114" wall) galvanized pipe is punched with a 1/2" hole every four (4) inches to allow versatile height adjustment. We also offer a complete line of accessories for the dock including augers, angle braces, mud pads and much more.